General Project - Med Sculpt
General Project - Med Sculpt
GP Drain

GP DRAIN

GP–Drain is a press-massage device for sector massages and venous-lymphatic drainage. The massage is executed using a boot with 9 independent sectors, overlapped like a “herring bone”. Pressing push gradually overlaps itself wi­thout leaving spaces during the inflation period thus eliminating the danger of a back flow and improving the circulation.
This method has been designed to drain the limb, from bottom to top, slowly and continuously, not damaging the venous-lymphatic system. This system is excellent as an accompanying measure during purification and detoxification treatments, as well as in the battle against excess weight and cellulite. In addition, the program offers a bandage that covers the abdominal wall.

General Project - Med Sculpt
General Project - Med Sculpt
General Project - Med Sculpt
Massage
systems
General Project - Med Sculpt
General Project - Med Sculpt
General Project - Med Sculpt
General Project - Med Sculpt
Merkmale
  • Elastische Membran mit drei verschiedenen Stärken
  • High Brilliance "Plug-in" Handgerät
  • 10.4" Touch Screen Farbdisplay
  • 75 voreingestellte Programme mit 4 verschiedenen Vakuumstärken
  • Kundendatenbank
  • Standard Handgerät: tiefe mechanische Massage
  • Ultraschall Handgerät: tiefe mechanische Massage mit Ultraschall
  • Aktualisierbare Software durch Flash Card
  • Aktualisierbare Software durch USB
  • 7 I/O Ports zur Datenübertragung
Technische Daten
Stromversorgung 220 ÷ 240 Volt AC (100 ÷ 130 V) 50/60 Hz monophase
Sicherungen 4 AT 230 V (6.3 AT für 100 ÷ 130 V Version)
Energieverbrauch 500 VA
Maximales Vakuum 850 mbar
Handgeräte 3 - Elastisch, Ultraschall, High Brilliance
Voreingestellte Programme 75 voreingestellte Programme mit 4 Leistungsstufen
Ultraschallfrequenz 3 MHz (10% Toleranz)
Maximale Ultraschalldichte 3 W/cm2
LED Wellenlänge 625 nm
LED Emissionsleistung 1 W max
Schutzklasse (nach CEI 60601-1) 1
Typ BF
Schutzklasse (IEC 529) IP20
Abmessungen 550 x 800 x h1860 mm
Gewicht 52.5 kg
Entspricht CEI EN 60601-1 (IEC 601-1) – CEI EN 60601-1-2 (IEC 601-1-2) - CEI EN 60601-1-4 (IEC 601-1-4) - FDA 510(k) K053041
Betriebsvoraussetzungen Temperatur: 15° - 40° C - RH 65% max
Maximale Betriebshöhe: 2000m über Null
Transport- und Lagervoraussetzungen Temperatur: 0° - 45° C - RH 80% max
Anwendungen

• Cellulitis

• Lokale Adipositas

• Körperstraffung

• Liposuktion Vor- und Nachbehandlung

• Reflexzonenmassage

• Lichttherapie

General Project - Med Sculpt
General Project - Med Sculpt
General Project - Med Sculpt